Table of Contents
Advertisement
Removing the power and volume-buttons
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1. Remove the
base
cover.
2. Remove the battery.
Procedure
1. Disconnect the coin-cell battery cable from the I/O board.
2. Disconnect the power and volume-buttons board cable from the I/O board.
3. Remove the power and volume-buttons board cable from the routing guides on the palm rest and keyboard assembly and the
speaker.
4. Remove the screw (M2x3) that secures the power and volume-buttons board to the palm rest and keyboard assembly.
5. Lift the power and volume-buttons board along with its cable off the palm rest and keyboard assembly.
Figure 27. Removing the power and volume-buttons board
1. coin-cell battery cable
50
Removing the power and volume-buttons board
computer. After working inside your computer, follow the instructions in
2. power and volume-buttons board cable
29
board
After
www.dell.com/
Advertisement
Table of Contents
