Chapter 49: Removing The Sensor Board; Prerequisites; Procedure - Dell Inspiron 17 7000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1. Remove the base cover.
2. Remove the battery.
3. Remove the wireless card.
4. Remove the display assembly.
5. Follow the procedure from step 1 to step 4 in
Procedure
1. Remove the screw (M2x2 Big Head) that secures the sensor board to the display-panel assembly.
2. Peel off the tape that secures the sensor-board cable to the sensor board.
3. Open the latch and disconnect the sensor-board cable from the sensor board.
4. Lift the sensor board off the display-panel assembly.
80 Removing the sensor board
Removing the sensor board
computer. After working inside your computer, follow the instructions in
"Removing the display panel".
49
After
www.dell.com/