NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
base
cover.
2. Remove the battery.
Procedure
1. Open the latch and disconnect the status-light board cable from the system board.
2. Remove the speaker cable from the routing guides on the palm-rest assembly.
3. Peel off the foam that secures the status-light board to the palm-rest assembly.
4. Lift the status-light board off the palm-rest assembly.
Removing the status-light board
computer. After working inside your computer, follow the instructions in
Removing the status-light board
19
After
www.dell.com/
37