Chapter 23: Removing The Fan; Prerequisites; Procedure - Dell Inspiron 17 7000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1. Remove the base cover.
2. Remove the battery.
Procedure
1. Remove the two screws (M2x3) that secure the fan to the palm-rest assembly.
2. Disconnect the fan cable from the system board.
3. Peel off tape that secures the fan cable to the palm-rest assembly.
4. Lift the fan off the palm-rest assembly.
Figure 19. Removing the fan
1. screws (2)
3. tape
computer. After working inside your computer, follow the instructions in
2. fan
4. fan cable
Removing the fan
Removing the fan
23
After
www.dell.com/
43