Chapter 41: Removing The Palm Rest; Prerequisites; Procedure - Dell Inspiron 17 7000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1. Remove the base cover.
2. Remove the battery.
3. Remove the memory modules.
4. Remove the coin-cell battery.
5. Remove the solid-state drive/Intel Optane memory
6. Follow the procedure from step 1 to step 3 in
7. Remove the wireless card.
8. Remove the fan.
9. Remove the status-light
10. Remove the touch pad.
11. Remove the display assembly.
12. Remove the graphics daughter-board.
13. Remove the heat sink.
14. Remove the I/O board.
15. Remove the keyboard.
16. Remove the power-adapter
17. Remove the power and volume-buttons
18. Remove the speakers.
19. Remove the system board.
Procedure
After performing the steps in prerequisites we are left with the palm rest.
70 Removing the palm rest
computer. After working inside your computer, follow the instructions in
module.
"Removing the hard
board.
port.
board.
Removing the palm rest
drive".
41
After
www.dell.com/