NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
base
cover.
2. Remove the battery.
Procedure
1. Disconnect the power-adapter port cable from the system board.
2. Remove the screw (M2x3) that secures the power-adapter port to the palm-rest assembly.
3. Lift the power-adapter port off the palm-rest assembly.
Figure 21. Removing the power-adapter port
1. power-adapter port cable
3. power-adapter port
Removing the power-adapter port
computer. After working inside your computer, follow the instructions in
2. screw
4. palm-rest assembly
Removing the power-adapter port
27
After
www.dell.com/
47