NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Connect the camera cable to the camera module.
2. Turn the camera module over.
3. Using the alignment post, adhere the camera to the display-panel assembly.
Post-requisites
1. Follow the procedure from step 6 to step 8 in
2. Replace the
display
assembly.
3. Replace the
wireless
card.
4. Replace the battery.
5. Replace the
base
cover.
Replacing the camera
computer. After working inside your computer, follow the instructions in
"Replacing the display
panel".
Replacing the camera
48
After
www.dell.com/
79