NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
base
cover.
2. Remove the battery.
Procedure
1. Disconnect the speaker cable from the system board.
2. Remove the speaker cable from the routing guides on the palm-rest assembly.
3. Remove the speakers from the alignment posts and lift the speakers off the palm-rest assembly.
Figure 15. Removing the speakers
1. speaker cable
3. palm-rest assembly
5. speakers (2)
Removing the speakers
computer. After working inside your computer, follow the instructions in
2. routing guides (2)
4. alignment posts (4)
17
After
www.dell.com/
Removing the speakers
35