Fujitsu PRIMERGY TX300 Operating Manual page 106

Expansions and Conversions
Additional RemoteView
RemoteView is a fully featured remote test and diagnosis package. The test and
diagnosis software is stored on a chipDISK. The chipDISK is a memory module
with an IDE interface. In the event of an error, the test and diagnosis software is
automatically loaded from the chipDISK and then executed.
Additional RemoteView Service Board
The RemoteView Service Board (RSB) is a PCI board with a fully independent
system; in other words, it has its own operating system with Web server and
SNMP agent and is available with an optional external power supply. The RSB
is mounted into a standard PCI slot and connected to the system board with a
power cable and data cable. The RSB allows remote diagnosis for system
analysis, remote system configuration and a remote restart should the
operating system or hardware fail. It comes with its own LAN connection as well
as its own COM port. In this way, all functions are made available either via LAN
or via modem.
Additional LocalView module (alphanumeric system display)
The LocalView module provides an alphanumeric display of system information
and hardware errors. It is an intelligent module with a microcontroller and its
own memory that can run independently of the attached server system.
The LocalView module includes the LCD panel and the toggle switch, both
integrated in a peripheral bay. The mechanism used allows the module to be
pulled out and opened with ease. The LocalView module can be installed in any
free 5.25 inch server slot. Further information about operation and display
modes is provided in the corresponding LocalView documentation.
Additional external SCSI interface
If the internal HDD modules are connected via a RAID controller, a channel of
the onboard controller can also be made available via an external SCSI
interface for connecting storage subsystems.
100
A26361-K881-Z102-4-7619