Table of Contents
Advertisement
Hardware Installation
Figure 16: Installing the server
Ê Lift the server onto the two projecting telescope bars.
V
CAUTION!
Never lift the server into the rack using the handles on the front panel.
Ê Slide the server a little in the direction marked (2) until the noses (3) engage
and/or position the server so that the holes of the telescope bars are in line
with those of the server. When doing this, ensure that the telescope bars are
kept in a locked position.
A26361-K881-Z102-4-7619
Installing/Removing the Rack Model into the Rack
1
2
3
47
Advertisement
Table of Contents
