Table of Contents
Advertisement
Hardware Installation
V
CAUTION!
With the installation in 3rd-Party Rack it is to be made certain that the
air flow is ensured from the front to the rear in the rack.
Ê Mount the necessary manufacturer original parts (like support bracket or
cable management).
I
Sometimes a number of parts of the delivered mounting kit cannot be
used because original parts of the 3rd-Party Rack are to be used.
Ê Mount if necessary the supplied assembly brackets on the telescopic rails as
described in section "Mounting into the PRIMECENTER Rack" on page 32.
Ê Mount the telescopic rails in the 3rd-Party Rack as described in section
"Mounting into the PRIMECENTER Rack" on page 32.
Ê Mount the server (see section "Installing the Server" on page 46).
Ê Route the cables as described in the original manual of the Rack.
A26361-K881-Z102-4-7619
Installing/Removing the Rack Model into the Rack
45
Advertisement
Table of Contents
