Fujitsu PRIMERGY TX300 Operating Manual page 8

Overview of the Documentation
Concept and Target Group of this Manual
This operating manual describes how to install, how to operate and how to
expand your server.
This operating manual is intended for those responsible for installing the
hardware and operating the system. The manual contains all the information
required for mounting and operating your PRIMERGY TX300.
To understand the different expansion options, you need a knowledge of
hardware and data transmission, as well as basic knowledge of the operating
system used.
Additional server documentation
To the PRIMERGY TX300 documentation set belong the following additional
manuals:
– "Safety and Ergonomics" manual (print version delivered together with the
system, PDF file available on the ServerBooks CD)
– "Warranty" manual (print version delivered together with the system, PDF file
available on the ServerBooks CD)
– Technical Manual for the system board D1409 (PDF file available on the
ServerBooks CD)
– BIOS Setup manual (PDF file available on the ServerBooks CD)
– "ServerStart Bundle" includes the ServerStart CD, the ServerBooks CD and
the print version of the manual „ServerStart Bundle". The PDF file of the
manual is also available on the ServerBooks CD.
– "Adaptec HostRAID User's Guide" (PDF file available on the ServerBooks CD)
I
If you need a backup of the ServerBooks-CD send the details of your
server via email address: Reklamat-PC-LOG@fujitsu-siemens.com.
Further sources of information
– technical manual for the rack
– manual for the monitor
– server management manual ServerView
– manual for the Remote Test and Diagnostic System RemoteView
– in the documentation for the boards and drives
– operating system documentation
– information files of your operating system
(see also "Related Publications" on page 107).
2
Introduction
A26361-K881-Z102-4-7619