Hydraulic Hoses - Shaver HD-8-S Operator's & Parts Manual

WARNING
Potential
Keep hands clear of Post
Driver while
Never place hand(s) on
top o f a post when inserting it into the Post
Driver. Always close the safety arm before
driving the post.
To avoid personal injury
do not attempt to clean,
adjust, or lubricate the
Post Driver while it is in
motion.
The rubber debris guard helps
shield the
debris that may
during post driving. To a v o i d
personal injury, make sure the
rubber debris guard is securely
attached to the Post Driver before
driving posts.
To avoid personal injury or death,
do not modify the Post Driver by
welding, drilling, or grinding. Do not
expose to extreme heat, such as
from a torch.
The main
assembly is tall and heavy. To avoid
tip over, resulting in serious injury
or death, leave the overhead lifting
device attached
carriage channel while assembling
components.
To avoid serious injury or death, the
safety arm must be installed after the
Post Driver has been mounted on a
machine, or the freestanding Post
Driver has been secured to prevent tipping.

Hydraulic Hoses

Avoid damaging hydraulic hoses.
Avoid sharp bends and kinks when
routing hydraulic hoses. Using a
bent or kinked hose will cause
severe back-pressure. Sharp bends
and kinks can internally damage
the hose, leading to premature
hose failure, resulting in personal
injury.
pinch points.
operating.
operator from flying
be generated
carriage channel
to the main
Do not
hoses. A sharp impact may cause
internal damage to
Applying pressure to a damaged
hose may cause it to rupture, resulting in
personal injury.
when placed under pressure;
with sudden, extreme force which can result
in property damage, personal injury, or
death.
Replace a hose if any of the following
conditions are present:
- End fittings that are damaged or leaking
- Outer coverings that are chafed or cut
- Wire shields that are exposed
- Outer coverings that are ballooning
- Flexible part of the hoses that are kinked
- End fittings that are displaced
Escaping high-pressure fluid can
penetrate the skin, causing serious
injury. Relieve pressure
unhooking hoses. Check/tighten all
connections
hydraulics. Never use your hand to
check for leaks.
7
WARNING
drop heavy objects on
the hose.
Mismatched
and hoses can cause the
coupling to
disconnect from the hose
separating
Pressure can be trapped
in a hydraulic system.
Trapped pressure
cause sudden movement
of an attachment. Use
c a u t i o n
disconnecting
lines or fittings. High-
pressure oil
released can
hose to move violently
while spraying oil.
before
couplings
violently
can
w h e n
hydraulic
that is
cause a
before
activating