Shaver HD-8-S Operator's & Parts Manual page 29

To avoid personal injury or death,
do not operate the Post Driver by
yourself. Always have another
person to control the machine or
power source.
NOTE: For operation of valve control levers
refer to the illustration below.
Valve control lever operation.
IMPORTANT NOTICE
If the tilt cylinder hoses are attached
differently than shown, the control of the drive
ram will not be as described in this manual.
2. Pull up Safety Latch and pull back Main
Hydraulic Control Lever to raise Drive Ram.
Drive Ram, Hydraulic Control Valve Lever, & Safety Lever.
3. Pull up Safety Latch and push Main
Hydraulic Control Lever to lower Drive Ram.
Drive Ram, Hydraulic Control Valve Lever, & Safety Lever.
IMPORTANT NOTICE
A
T THE BEGINNING OF EACH DAY
HYDRAULIC CONTROL LEVER TO CYCLE THE
DRIVE RAM UP AND DOWN
WITHOUT IMPACT WITH A POST OR THE GROUND
" "
TO SEASON THE DRIVE RAM RETURN SPRINGS
F
AILURE TO FOLLOW THIS RECOMMENDATION
CAN CAUSE DAMAGE TO THE SPRINGS
NOTE: T
HE TRACTOR OR OTHER POWER SOURCE
MUST BE CAPABLE OF MAINTAINING ADEQUATE
HYDRAULIC PRESSURE
SMOOTHLY OPERATE
29
,
USE THE MAIN
10 15
TO
.
( RPM)
ENGINE
( ) P D
CYCLE THE OST RIVER
,
TIMES
,
.
TO
.