Shaver HD-8-S Operator's & Parts Manual page 31

6. Do not stand in front of the drive ram while
operating the Post Driver. Stand at a
45-degree angle to the side of the Post
7. To drive the fence post straight, adjust the
main carriage channel side-to-side and fore-
and-aft using manual cranks (manual base
plate) or second and third hydraulic control
valve levers (hydraulic base plate).
Tilt top of Drive Ram away from operator push the end
lever away from the operator.
Tilt top of Drive Ram toward operator pull the end lever
toward the operator.
31