Self-Contained Mounting - Shaver HD-8-S Operator's & Parts Manual

3. Attach the three-point top link to removable
pin ('B' below) and secure with cotter pin.
NOTE: Adjust the length of the machine's top
link, as required, to correctly attach the Post
Drivers 3-Point Mounting Bracket.
A
Three-Point Hitch Assembly, Top Link Pin, & Cotter Pin.
NOTE: The HD-8 Post Driver will fit tractors with
Category I or Category II three-point hitches.
Use bushings on hitch pins, if required, to
correctly install lift arms.
NOTE: The HD-10, SHD-10, & HD-12 Post
Drivers will fit tractors with Category II or
Category III three-point hitches. Use bushings
(Owner/operator supplied) on the hitch pins, if
required, to correctly install the lift arms.
4. Attach hydraulic pressure supply hose
(small diameter) to the tractor pressure
supply port. Attach hydraulic return
hose (larger diameter) to hydraulic fill
port/tube.
Pressure Hose
B
A
Control Valve, Hydraulic Pressure Hose, and Hydraulic
Return Hose.
NOTE: The operator is responsible
installing quick-disconnect fittings (or other
suitable fittings) on the Post Driver hoses.
Make sure the fittings are compatible with the
tractor hydraulic fittings.
5. When traveling always install the road lock
pin (arrow below) in the "transport" position as
shown below. The Post Driver can now be
moved to the work site.
Drive Ram & Road Lock Pin in transport position.
Operating Instructions

Self-Contained Mounting

1. With the Post Driver positioned on a hard
level surface, move the skid loader or other
26
Return Hose
Control Valve
for