Ptz (Function) [M6.1] - LEGRAND 430 557 User Manual

•

PTZ (FUNCTION) [M6.1]

• PTZ operation
Press "PTZ" button -[F3] or [RC6] or [M6.1] - to display in full screen and operate PTZ cameras.
Press "ENTER/OK" button in PTZ mode, you will see "PTZ-ADVANC" menu.
• PTZ general movement
(1)Moves pan/tilt camera from up/ down and right/ left using arrow keys [F8] or [RC10].
(2) enlarge or reduce the screen size by Z- /Z+ buttons while using zoom camera.
(3) move to other channels by number button on remote controller.
• PTZ ADVANCE
FOCUS : adjust focus
+ : Focus in
- : Focus out
AUTO : Auto focus mode
IRIS : iris control
+ : Open iris
- : Close iris
AUTO : Auto iris mode
SPEED : operating speed
+ : increase the speed.
- : decrease the speed.
PRESET
TOUR : to select a tour set at [M1.2.4] and run it.
GO : to select a preset position set at [M1.2.3] and move
on it.
OSD MENU : do not use
In case the speed dome's menu in nethertheless displa-
yed, click on "FOCUS" + to escape
49
OSD MENU