•
EVENT SETUP [M1.4]
•
NOTE : you have to set it as "Event recording" at Schedule record setup to use this function.
When the event (sensor/motion/video loss) is detected on DVR side, DVR alerts by message pop-up, beep sound or
E-mail notification. You must setup event recording on schedule record setup to use this function.
Event Setup - Motion [M1.4.1]
OFF – no motion detection.
SENSITIVITY : select a level of detection sensitivity.
level of sensitivity : 0 < 1 < 2 < ..... < 9
ALARM OUT : activate alarm on motion detection. Port 1 to 4 can be selected or "MULTI" if several
ports are needed.
MOTION AREA : select detecting area.
ALL – detect the whole camera screen.
PART – detect motion detection area.
29
Motion detection
area