Disabling And Enabling The Ups Emergency Power Off (Epo) Function - LEGRAND MIDDLE ATLANTIC NEXSYS User Manual

Line Interactive UPS User Manual
CAUTION
ATTENTION
Disabling and Enabling the UPS Emergency Power Off
(EPO) Function
Your UPS (A) is equipped with an EPO (emergency power off) function.
Use a connector (F) to enable the EPO function by CLOSING the contact. The UPS comes from the factory with
the contact OPEN and EPO function disabled.
NOTE
For more information, see "Understanding Rear Panel Connections" on page 24.
A

Disabling and Enabling the UPS Emergency Power Off (EPO) Function

Disable the sleep mode function to keep your network card on regardless of your UPS
power settings.
When enabled, sleep mode deactivates the network card port when the UPS is Off, the
batteries are fully charged, and the LCD panel is asleep.
For more information, see "Using Main Menu > Configuration Functions > Service Mode"
on page 32.
Désactivez la fonction de mode veille pour garder votre carte réseau allumée quels que
soient les paramètres d'alimentation de votre onduleur.
Lorsqu'il est activé, le mode veille désactive le port de la carte réseau lorsque l'onduleur
est éteint, les batteries sont complètement chargées est en veille et l'écran LCD.
Pour plus d'informations, voir "Utilisation du menu principal > Fonctions de configuration >
Mode service" à la page 32.
Images in this manual typically show a UPX-1000R-2 model to show the location of
•
connectors, buttons, and lights on the LED panel. The locations of these items are
similar on all available NEXSYS™ Line Interactive UPS models.
The EPO connector and socket are shown in black for clarity.
•
F
©2022 | Legrand AV,
Close the contact as desired,
and then insert the EPO
connector into its port.
19
Inc. All rights reserved.