Table of Contents
Advertisement
Event setup – E-MAIL [M1.4.4]
EVENT E-MAIL(ON/OFF) : select "ON" to enable the function
MOTION(ON/OFF) : select "ON" Motion event detection
SENSOR(ON/OFF) : select "ON" Sensor event detection
VLOSS(ON/OFF) : select "ON" Video Loss event detection
DVR NAME : input DVR name that will appeared on E-mail
E-MAIL ADDRESS : input E-mail address (maximum 3)
Note : when you apply this function on frequent motion detection or sensor detection, it will
cause a lot of E-mail transmission, then it will affect to DVR system performance.
Therefore we suggest you not to use this function in this case.
EX. E-mail notification you would receive.
31
Advertisement
Table of Contents
