Table of Contents
Advertisement
Camera setup – preset [M1.2.3]
System will record according to preset camera positions.
Check if the camera supports preset function before setting up.
Up to 64 preset positions for each channel.
Select camera.
Select "SET" button for turning the channel PTZ mode.
Move the PTZ camera to wanted position.
Press "ENTER/OK" button -[F9] or [RC11]- to save the preset.
CAMERA : select cameras to setup preset positions.
PAGE : move to the next page.
SET : To enter PTZ mode and define PTZ
CLE : Clear the recorded position
CLEAR ALL : clear all the setup values for the camera selected.
21
Advertisement
Table of Contents
