Remote Controller Id - LEGRAND 430 557 User Manual

• Remote –controller ID
• Remote-controller ID
One remote-controller can be used to operate several DVRs at one site.
The remote-controller operate one DVR at a time according to the registered ID value.
• DVR ID turns yellow if remote controller's ID matches with DVR ID. Then you can operate the DVR.
• It will turn red if remote controller's ID does not match with DVR ID. Then you cannot operate the DVR.
• you can set the DVR IDs at System menu [M1.7.5].
• setting up remote-controller ID
(1) press "DVR-ID" button [RC2].
(2) it will beep. ??? Then you can input remote-control ID.
(3) press the DVR ID to operate using number buttons.
R:01 R:01
Not working Not working
R:01 R:01
working working
R:02 R:02
R:02 R:02
52
DVD ID DVD ID
DVD ID DVD ID
Remote-controller ID : 02 Remote-controller ID : 02
Not working Not working
Remote-controller ID : 02 Remote-controller ID : 02
working working