Table of Contents
Advertisement
Camera setup – TOUR [1.2.4]
You can move camera to follow a path by saved preset positions for each channel.
You can set 4 scan point lists for each channel.
CAMERA : select a camera to set scan point.
LIST : select a list to save scan point.
You can setup total 4 lists.
One scan list is consist of total 16 preset positions.
PRESET : select preset position you want.
CLEAR ALL : clear all setup values.
Ex :
Camera 1 will move following the path as below.
PTZ01 (3 sec) ‡ PTZ02 (3 sec) ‡ ...
Move the PTZ camera to wanted position.
Press "ENTER/OK" button -[F9] or [RC11]- to save the preset.
22
Advertisement
Table of Contents
