2 Safety and the environment
The manufacturer has undertaken all necessary measures to
ensure safe operation. The user must ensure that the instruments
are set up and installed in such a way that their safe use is not
affected.
The instruments are factory-tested and were delivered in a safe
condition.
These operating instructions contain information and warnings that
must be followed by the user in order to ensure safe operation.
•
Assembly, commissioning, operation and maintenance of the
measuring unit may only be performed by trained authorised
personnel. The personnel must be authorised for the specified
tasks by the system operator.
•
The authorised personnel must have read and understood
these operating instructions, and must comply with the
directions contained herein.
•
Check that all connections are correct before commissioning
the complete measuring point.
•
Do not commission damaged products and keep these from
being inadvertently commissioned. Mark the damaged products
as defective.
•
Faults at the measuring point may only be corrected by
authorised and specially trained personnel.
•
If faults cannot be corrected, the products must be taken out of
operation and secured from inadvertent commissioning.
•
Repairs that are not described in these operating instructions
may only be carried out directly by the manufacturer or by the
service organisation.
6