Table of Contents
Advertisement
4 Initial operation
On-site preparations
The installation point must be freely accessible and there must be
enough space to work around the pipes.
A stable stepladder is required for all assembly work carried out up
to 3.5 metres off the floor (height of the pipe). A working platform
must be provided for work at greater heights. If the measuring point
cannot be accessed by a platform, then scaffolding or other
equipment must be used to provide a safe working platform.
Any cladding or insulation covering the pipes must be removed
around the measuring point (clearance of at least 0.6 metres.
Necessary grinding work in the case of corroded pipes must be
carried out before montage.
4.1.2.
Assembly of the clamp
20
1 Clamp
2 Seal
3 Cap
4 Threaded bolt
5 Nut
6 Delrin® washer
7 Retaining bracket
8 Screw yoke
9 Side bracket
Advertisement
Table of Contents
