Intermittent Operation; Technical Data - Hamron 604-096 Operating Instructions Manual

Hide thumbs

Table Of Contents

Table of Contents

Available languages



Before using the winch, apply the parking brake on the vehicle and wedge the wheels.



Do not machine or weld any part of the winch. This could damage the winch and result in the risk of

personal injury and/or material damage.



Never allow the power supply to the winch to be switched on for more than 120 seconds. This can

cause the drum and wire to overheat.



Never connect the winch to the mains supply, this will destroy the winch and result in a risk of

serious electric shock. Do not expose the winch and/or the wire to jerking.



Be careful when winching loads up or down slopes. Make sure that no people, animals or objects,

get in the way of the load.



Do not expose the wire to high temperatures, or abrasion. Use mats or cloths to provide protection

from sharp stones etc. Clean the uncoiled wire from sand and clay with a high-pressure jet after

use. Allow the wire to dry before winding it up again.



Protect the wire from heat, chemicals and sharp edges. Never tie knots in the wire.



NOTE: Repairs must only carried out by an authorised service centre. Never attempt to open the

winch, this will invalidate the warranty.



The warnings and instructions in these Operating Instructions do not cover all of the possible

situations that may arise. The user must employ common sense and due caution.