SECTION 5
The insert and the filter body should be carefully washed out and blown
through with compressed air. Assembly should be done in reverse order.
Cleaning the air filter (filters):
5.3.3 DRAINING WATER FROM AIR TANK
FIG. 5.7
Draining water from air tank
(1) drain valve, (2) air tank,
Required service actions
Open out drain valve (1) placed in lower part of tank (2) – the tank is placed on
brackets of right longitudinal frame of lower frame.
Hold the filter cover (2) with the other hand. After removing slide lock,
the cover is pushed off by the spring, in the filter housing.
• every 3 months of use,
The compressed air in the tank causes the removal of water to the
exterior.
5.17
Pronar T683