Using Under-Run Protective Devices - PRONAR T683 Operator's Manual

Hide thumbs Also See for T683:
Table of Contents

Advertisement

Pronar T683
• Do not release air from warm tyres to adjust the pressure or the tyres will be
underinflated when temperatures return to normal.
• Protect tyre valves using suitable caps to avoid soiling.
• Do not exceed the trailer's maximum design speed.
• When sweeper is operated all day, stop working for a minimum of one hour in the
afternoon.
• Adhere to 30 minutes rest for cooling tyres after driving 75 km or after 150
minutes continuous travel depending on which occurs first.
• Avoid potholes, sudden manoeuvres or high speeds when turning.

4.8 USING UNDER-RUN PROTECTIVE DEVICES

Two pairs of hinged tiltable under-run protective devices can be installed as trailer additional
equipment. The under-run protective devices fulfil a very important role in road safety and
therefore their good technical condition should be ensured.
Lifting
Pull the under-run protective device by holding its lower bar.
Raise the under-run protective device to the height shown in Figure (4.7)
Move the under-run protective device away. Appropriate recess and slotted
holes allow the locking of under-run protective device in the raised position.
Lowering
Pull the under-run protective device.
Lower the under-run protective device and press until the bracket locks into the
latch.
Secure the under-run protective device with pins (5).
4.26
SECTION 4

Advertisement

Table of Contents
loading

Table of Contents