Mellanox Technologies MTS3610 Installation Manual page 6

Table of Contents

MTS3610 Installation Guide

Step 8.

Slide the chassis onto the shelf until the face plate of the chassis touches the vertical

rack support.

Step 9.

Screw the bolts through the faceplate into the caged nuts, and tighten all ten bolts and

nuts.

Step 10.

Place the lock down bar over the lip of the chassis, and align the holes in the lock

down bar with the holes in the shelf.

Step 11.

Place a washer on each Allen screw and screw down the lock down bar to the shelf

using the Allen wrench supplied. Use all 5 Allen screws.

Step 12.

Connect a valid ground to the grounding post.

Rev 1.2.2

Figure 8: Face Plate Mounting Bolt Locations

Figure 9: Lock Down Bar

Mellanox Technologies

Holes in the

faceplate for

mounting on the

rack.

The lock down bar goes

over the lip on the bot-

tom of the chassis.

Table of Contents