Mellanox Technologies MTS3610 Installation Manual page 3

MTS3610 Installation Guide
Caged nuts and bolts
Right and Left
Cable holders
Before starting the procedure, put the ESD strap on and connect it to a valid ground.
Installing the Bottom Shelf
Step 1. Select the location in the rack. Try to keep the chassis as low as possible to keep the center of
gravity low.
Choose which way you want the chassis to face in the rack. Keep in mind that one side of the chassis can
have up to 324 cables connected. The other side of the chassis will have power cables. The distance between
the rack and the door will be small on one side of the rack as opposed to the other side of the rack.
Rev 1.2.2
Figure 2: Installation Kit Parts
Lock down bar
Mellanox Technologies
Rail slide
Eye bolts
3