Electromagnetic Emissions - MIMSAL LUPA LED H.F User Manual

REF
B0101800 WALL B SUPPORT
B010190 AH TABLE CLAMP
82026 RAIL PLUS BRACKET
09651 TROLLEY STAND 8,8 kg
B0101S0 EXTENSION ARM

10. ELECTROMAGNETIC EMISSIONS

All electronic devices for medical use must comply with the requirements of the IEC 60601-1-2
standard.
Likewise, it is mandatory to respect the precautions, the information in the Electromagnetic
Compatibility (EMC) guide included in this manual and the verification of all medical devices in
simultaneous operation to ensure the electromagnetic compatibility and the coexistence of all
other medical devices before undertaking a surgical procedure.
MANUFACTURER DIRECTIVES AND DECLARATION – ELECTROMAGNETIC EMISSIONS
Our devices are designed to be used in an ELECTROMAGNETIC ENVIRONMENT as specified below. The user must
ensure that the units can operate in that environment.
NOTA: Home health care settings have higher immunity requirements than professional medical care facilities. Therefore,
the interference immunity requirements for professional medical care centers are included here.
EMISSIONS TESTS
STANDARD BASIC EMC
Conducted RF Emissions
CISPR11
Radiated RF Emissions
CISPR11
Harmonic Distortion
IEC (EN) 61000-3-2
Voltage Fluctuations and Flashing
IEC (EN) 61000-3-3
MODEL GROSS WEIGHT
COMPLIANCE
Group 1
Class B
Class A
NET WEIGHT
0,25 KG 0,20 KG
0,37 KG 0,29 KG
0,24 KG 0,19 KG
9,18 KG 8,56 KG
0,74 KG 0,56 KG
ELECTROMAGNETIC ENVIRONMENT
The device only uses RF energy for its internal operations. Its
RF emissions are therefore very low and are unlikely to cause
interferences with nearby electronic equipment.
The device is suitable to be used in all establishments, including
domestic establishments and those connected directly to the
public low-voltage power mains that supply buildings used for
domestic purposes.
BOX DIMENSIONS
91 x 221 x 122 mm
91 x 221 x 122 mm
115 x 175 x 75 mm
160 x 160 x780 mm
160 x 520 x 90 mm
ENG
18