Ah Table Clamp - MIMSAL LUPA LED H.F User Manual

3.2 AH TABLE CLAMP

REF
B010190
Install the accessory without the lighting unit installed on it.
It is the customer's responsibility to ensure that the surface that it is attached to is
secure and sufficiently strong.
Check regularly that the unit is still stable in order to avoid the possibility of the
lighting unit falling down.
The bracket is only designed to support the weight of the lamp. If additional weight is
added, this may cause damage to the lighting unit and/or injury to the user.
Installation and assembly
- Use the handle to loosen the adjustment screw (1).
- Rest the base of the clamp on the surface of the table (2).
- Adjust the body of the clamp (3) until it is touching the edge of the table.
- Turn the handle (4) until the clamp and the table are firmly attached.
- Once the clamp is fixed and secure, position the lamp through the upper hole (5).
MODEL
AH TABLE CLAMP
DESCRIPTION
Table clamp
ENG
9