Advertisement
Quick Links
Assembly & Installation Instructions:
Essentia 2-Leg Workcenter ES2E30-48, ES3E30-48
Parts Included, Frame Set
A
Legs
Qty: 2
E
#M6 × 12 mm Flat Head Cap Screw
Qty: 12
J
3/ 1 6" White Leg Cable Loops
Qty: 10
K
#8 × ⅝" Pan Head Screw
Qty: 10
Required & Sold Separately
Foot Kit
Basic or Programmable Switch
Top
Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Box 1: 6608716-2PK-01
B
C
D
F
Short Bracket
Qty: 4
Left End Bracket
Qty: 1
Right End Bracket
Qty: 1
4 mm Allen Wrench
Qty: 1
G
#12 × ¾" Pan Head
Laminate Top Screw
Qty: 40
H
Control Box
Qty: 1
I
Cable Spool
Qty: 2
L
Power Cord
Qty: 1
Box 2: 4435511-01
1 of 10
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Workrite Ergonomics Essentia ES2E30-48
Summary of Contents for Workrite Ergonomics Essentia ES2E30-48
- Page 1 3/ 1 6" White Leg Cable Loops Qty: 1 Qty: 10 4 mm Allen Wrench #8 × ⅝" Pan Head Screw Qty: 1 Qty: 10 Required & Sold Separately Foot Kit Basic or Programmable Switch Workrite Ergonomics | 800.959.9675 www.workriteergo.com 1 of 10...
- Page 2 Maximum loading of table assembly is 225 lb. (102 kg). Maximum load includes the weight of the table top itself, any equipment placed upon it, and any equipment suspended or hanging under it. Loading should be evenly distributed over table surfaces. “Payload Capacity” is the Workrite Ergonomics recommended maximum loading which includes the Workrite sourced worksurface.
- Page 3 Hardware at actual size #M6 × 12 mm Flat Head Cap Screw Caution! Only use the #M6 × 12 mm Flat Head Cap Screw (E) for assembly. Use of longer screws will damage legs. Workrite Ergonomics | 800.959.9675 www.workriteergo.com 3 of 10...
- Page 4 #12 × ¾" Pan Head Laminate Top Screws (G). Tighten securely. Skip to Step 5. 3 screws per Short Bracket 2 screws per End Bracket (2 installed in Step 3b) 4 of 10 Workrite Ergonomics | 800.959.9675 www.workriteergo.com...
- Page 5 #12×¾" Pan Head Laminate Top Screws (G). Tighten securely. 3 screws per Short Bracket 2 screws per End Bracket (2 installed in Step 4c) Workrite Ergonomics | 800.959.9675 www.workriteergo.com 5 of 10...
- Page 6 Attach Cable Spool (I) with the #12 × ¾" Pan Head Screw (G) to underside of worksurface. If you do not have a Workrite worksurface, mount Cable Spools (I) in a convenient location between Legs and Control Box. Hardware at actual size #12 × ¾" Pan Head Laminate Top Screw 6 of 10 Workrite Ergonomics | 800.959.9675 www.workriteergo.com...
- Page 7 Note: #8 × ⅝" Pan Head Screw (K) are included for fastening the P-Loops, but the #12 × ¾" Pan Head Laminate Top Screws will work better when mounting P-Loops in the locations shown above. Workrite Ergonomics | 800.959.9675 www.workriteergo.com 7 of 10...
- Page 8 Insert the Power Cord (L) into the power port on the Control Box (H). Leg Cable (A) into Leg Ports “M1” & “M2” Switch Cable into Switch Port “HS” Power Cord (L) in Power Port 8 of 10 Workrite Ergonomics | 800.959.9675 www.workriteergo.com...
-
Page 9: Cleaning Instructions
To clean the Essentia legs, apply cleaner to a soft cloth. Suggested cleaners: Windex or Formula 409. Do not use solvents and do not saturate or spray cleaners directly onto workcenter base. ✓ Parts & Accessories Visit http://workriteergo.com/documentation/other/workrite_ergonomics_pricing_specification_guide.pdf replacement parts. Workrite Ergonomics | 800.959.9675 www.workriteergo.com 9 of 10... - Page 10 10 of 10 Workrite Ergonomics | 800.959.9675 www.workriteergo.com #1500240- Rev D...
Need help?
Do you have a question about the Essentia ES2E30-48 and is the answer not in the manual?
Questions and answers