Download Print this page

Mercedes-Benz EQS 2022 Operator's Manual page 70

Hide thumbs Also See for EQS 2022:

Advertisement

68 68
Occupant safety
Make sure that the rear bench seat, the
#
rear seat and the seat backrest are
engaged before every trip.
If the rear seat backrest is not engaged and
locked in place, the red lock veri cation indicator
will be visible.
When installing a belt-secur
When inst
alling a belt-secured c
ed child r
t t em, observ
em, observe t e the f
he follo
ollowing:
wing:
O Always comply with the manufacturer's
installation and operating instructions for the
child restraint system used.
O Also secure Top Tether if present
(
page 66).
/
O When using a w
When using a weight cat
eight categor
egory 0/0+ bab
car seat and a weight cat
car seat and a w
eight categor
egory I r
f f acing c
acing child r
hild res estr traint syst
aint system on a r
em on a rear seat
adjust the front seat so that the seat does
not touch the child restraint system.
O When using a w
When using a weight cat
eight categor
egory I f
f f acing c
acing child r
hild res estr traint syst
aint system:
em: remove the
head restraint from the respective seat, if
possible.
A er the child restraint system has been
removed, replace the head restraint immedi-
ately and adjust all head restraints correctly.
O The backrest of the forward-facing child
restraint system must, as far as possible, be
resting on the seat backrest of the rear seat.
O If the head restraint of the child seat cannot
be fully extended when it is installed in the
hild res estr traint sy
aint sys- s-
vehicle, this will result in restrictions on the
maximum size setting for child restraint sys-
tems in weight category II or III.
www.carobook.com
Contact with the roof when the head
restraint is fully extended and locked in place
will not result in any restrictions on use.
O The child restraint system must not be put
y 0/0+ baby y
under strain between the roof and the seat
y I rearw
earwar ard- d-
cushion and/or be installed facing the wrong
ear seat: :
direction. Where possible, adjust the seat
cushion inclination accordingly.
O The child restraint system must not be put
y I forw
orwar ard- d-
under strain by the head restraint. Adjust the
head restraints as appropriate.
O Make sure that the child's feet do not touch
the front seat. If necessary, move the front
seat slightly forwards.
The seat belts on the following seats are equipped
with a special seatbelt retractor:
Front passenger seat
R
Rear seats
R
When enabled, the special seatbelt retractor
ensures that the seat belts of the front passenger
seat and rear seats do not slacken once the child
restraint system is secured (
/
Install the child restraint system.
#
The entire base of the child restraint system
must always rest on the seat surface of the
rear seat.
Always make sure that the shoulder belt strap
#
is correctly routed from the seat belt outlet of
the vehicle to the shoulder belt guide on the
child restraint system.
The shoulder belt strap must be routed
forward from the seat belt outlet.
page 63).

Advertisement

loading