Advertisement
174 Climate control
174
Do not repeatedly switch on the seat
#
heating.
To protect against overheating, the seat heating
may be temporarily deactivated a er it has been
switched on repeatedly.
The air inside the vehicle can be heated, ventila-
ted or cooled to the set temperature when the
vehicle is parked.
When the vehicle is connected to power supply
equipment, priority is given to charging the high-
voltage battery to a speci ed minimum charge.
The running time of pre-entry climate control may
be reduced under the following conditions:
The vehicle is not connected to power supply
R
equipment.
The high-voltage battery is not fully charged.
R
With active pre-entry climate control, the charge
level of the high-voltage battery may be reduced,
even if the charging cable connector is connec-
ted.
If present, seat ventilation is activated in cooling
and ventilation mode.
If present, the following functions are activated in
heating mode:
Seat heating
R
Steering wheel heating
R
Mirror heater
R
Rear window heater
R
Windshield heater
R
When the set temperature is changed, the climate
control mode will automatically be updated. It will
be switched from heating mode to ventilation or
www.carobook.com
cooling mode, from cooling mode to ventilation or
heating mode or from ventilation mode to heating
or cooling mode.
Depending on the vehicle's equipment, the follow-
ing functions will also be adjusted during pre-
entry climate control if they have already been
switched on during regular vehicle operation:
Fragrancing
R
Ionization
R
Se Setting pr
tting pre-entr
e-entry climat
y climate contr
e control f
ol for depar
time via t
time via the climat
he climate bar
e bar
Multimedia system:
Climate Menu
Pre-entry Climate Ctrl.
4
5
Se Setting t
tting the depar
he departur
ture time
e time
%
The set departure times are used for the vehi-
cle's pre-entry climate control and for predic-
tions regarding the approximate state of
charge and range at the time selected. Addi-
tional information on the charging settings:
(
page 209).
/
Select
Edit Departure Time
#
Select a departure time or set a new depar-
#
ture time.
Se Setting t
tting the r
he repeat days
epeat days
Select
Edit Departure Time
#
Set the desired departure time and select the
#
corresponding weekdays on which this depar-
ture time is to apply.
Press
OK
to con rm.
#
or departure
ture
´.
´.
Advertisement
