Download Print this page

Mercedes-Benz EQS 2022 Operator's Manual page 209

Hide thumbs Also See for EQS 2022:

Advertisement

or
Press the center of the rear section of socket
#
ap 1.
Socket ap
1
swings open and status display
2
lights up white.
%
When the vehicle is started (the õ display
is lit in the driver's display), socket ap
cannot be opened.
Remove socket cover
4
from the lower con-
#
nection of vehicle socket 3.
%
The CCS charging cable connector requires
both vehicle socket connections 3.
Insert the charging cable connector into vehi-
#
cle socket
3
to the stop.
Make sure that the charging cable is not taut
when inserted.
Status display
2
ashes orange and, as soon
as the high-voltage battery is charged, blue.
%
When the charging sequence for the ambient
lighting is activated, the ambient lighting lights
up for approximately 30 seconds as with sta-
tus display
2
(
page 155).
/
When Sound Experience is activated, di erent
situations, for example the charging cable
connector being inserted and removed or the
beginning of the charging process, are
accompanied by selected sounds. For infor-
mation on Sound Experience, please refer to
the Digital Operator's Manual.
1
When the charging cable is connected to the vehi-
cle, the vehicle cannot be started or moved.
At the start of the charging process, the condition
of charge display is shown in the driver's display
www.carobook.com
with a charging prediction. The charging predic-
tion refers to the time at which the high-voltage
battery will be fully charged.
%
When the vehicle is switched on, a lightning
symbol appears next to the condition of
charge display in the driver's display during
the charging process.
%
Depending on the temperature, the fan and
battery cooling system may audibly switch on
during the charging process.
%
If the vehicle is idle for lengthy periods and
connected to the mains supply, the high-volt-
age battery will be recharged automatically as
Driving and parking 207
needed or when electrical consumers are
activated (e.g. the pre-entry climate control).
Ending the dir
Ending t
he direct curr
ect current c
ent char
harging pr
ging process (mode
4) 4)
R R eq equir uirements:
ements:
The distance between the SmartKey and the
R
vehicle does not exceed 3
207
ocess (mode
(1 m).

Advertisement

loading