Advertisement
66 66
Occupant safety
V V ehicles wit
ehicles with st
h standar
andard seats
d seats
1
LATCH-type (ISOFIX) mounting bracket
Remove and stow away covers 1.
#
Attach the LATCH-type (ISOFIX) child restraint
#
system to both mounting brackets in the vehi-
cle.
A er removing the child seat, reattach covers
#
1.
F F ast
astening a T
ening a Top Tet
op Tether
her
& W W ARNING
ARNING Risk of injury or death if the
rear seat backrests are not locked a er
Top Tether belts are installed
The rear seat backrests may fold forwards
when you are driving.
As a result, child restraint systems will no lon-
ger be able to perform their intended protec-
tive function. This may also cause additional
injuries.
www.carobook.com
Always lock rear seat backrests a er
#
installing Top Tether belts.
Observe the lock veri cation indicator.
#
If the rear seat backrest is not engaged and
locked in place, the red lock veri cation indicator
will be visible.
& W W ARNING
ARNING Risk of injury or death from
adjusting the seat a er installing a child
restraint system
Vehicles with electrically adjustable rear
bench seats:
The following may occur:
The Top Tether belt may sit either too loose
R
or too tight
The child restraint system may be loose,
R
incorrectly positioned or damaged and
then not perform its intended protective
function.
Never adjust the seat a er the child
#
restraint system has been installed.
¯ If the child restraint system is equipped
with a Top Tether belt:
The risk of injury may be reduced by Top
Tether. The Top Tether belt enables an
additional connection between the child
restraint system attached with LATCH-type
(ISOFIX) (le and right rear seats) or the
seat belt (all rear seats) and the vehicle.
Advertisement
