Advertisement
368
368 Breakdown assistance
Remove the valve cap from valve
#
faulty tire.
Screw lling hose
8
onto valve 7.
#
Insert plug
4
into a 12 V socket in your vehi-
#
cle.
Switch on the vehicle.
#
Switch on the tire in ation compressor using
#
On/O switch 3.
The tire is in ated. First, tire sealant is pum-
ped into the tire. The pressure may brie y rise
to approximately 500 kPa (5.0 bar/73 psi).
Do no
Do not switc
t switch h o o t t he tir
he tire e in ation
in ation com
during t
dur
ing this phase!
his phase!
Let the tire in ation compressor run for a max-
#
imum of ten minutes.
The tire should then have attained a tire pres-
sure of at least 200 kPa (2.0 bar/29 psi).
If tire sealant leaks out, make sure you clean the
a ected area as quickly as possible. It is prefera-
ble to use clean water.
If you get tire sealant on your clothing, have it
cleaned as soon as possible with perchloroethy-
lene.
7
on the
www.carobook.com
If, If, a er
a er t t en minut
en minutes, a tir
(2.0 bar/29 psi) has no
(2.0 bar/29 psi) has not been att
Switch o the tire in ation compressor.
#
Unscrew the lling hose from the valve of the
#
faulty tire.
Please note that tire sealant may leak out when
unscrewing the lling hose.
Drive forwards or in reverse very slowly for
#
approximately 33
compr pressor
essor
es, a tire pr
e pressur
essure of 200 kPa
e of 200 kPa
t been attained:
ained:
(10 m).
Pump up the tire again.
#
A er a maximum of ten minutes the tire pres-
sure must be at least 200 kPa (2.0 bar/
29 psi).
& W W ARNING
ARNING Risk of accident due to the
speci ed tire pressure not being achieved
If the speci ed tire pressure is not achieved
a er the speci ed time, the tire is too badly
damaged. The tire sealant cannot repair the
tire in this instance.
The braking characteristics as well as the driv-
ing characteristics may be greatly impaired.
Do not continue driving.
#
Consult a quali ed specialist workshop.
#
If, If, a er
a er t t en minut
en minutes, a tir
es, a tire pr
e pressur
essure of 200 kPa
(2.0 bar/29 psi) has been attained:
(2.0 bar/29 psi) has been att
ained:
Switch o the tire in ation compressor.
#
Unscrew the lling hose from the valve of the
#
faulty tire.
e of 200 kPa
Advertisement
