Advertisement
200 Driving and parking
200
Do not use adapters.
R
Make sure to observe the safety informa-
#
tion on the charging station.
Most charging stations must be activated before
the charging process, e.g. using an RFID card or
via Plug & Charge. Observe the on-site operator's
instructions for the charging station and the notes
on Mercedes me Charge (see the vehicle's Digital
Operator's Manual).
The amount of energy dispensed for the charging
process, shown by the charging station, may be
higher than the amount of energy actually absor-
bed by the high-voltage battery. This is the result
of di erent levels of charging losses and is descri-
bed as recharge e ciency. Charging losses occur,
for example, due to heat that builds up when
charging or from auxiliary consumers that are
switched on. Further information on recharge e -
ciency can be obtained at a quali ed specialist
workshop.
Se Setting t
tting the maximum per
he maximum permissible c
missible char
r r ent f
ent for c
or char
harging at a mains socket
ging at a mains socket
* N N O O TE TE Overloading the mains socket due
to excessive charging current
If the charging current is too high, the fuse
could be tripped or the external mains supply
could overheat.
Ensure that the external mains supply
#
has been designed to handle the charg-
ing current provided.
www.carobook.com
For safety reasons, only use the charging
#
cable supplied with the vehicle or an
original Mercedes-Benz charging cable.
Mercedes-Benz thoroughly tests these
original charging cables for their suitabil-
ity for high-voltage charging of your vehi-
cle. Purchase these parts at an author-
ized Mercedes-Benz Center and obtain
advice there.
Check the maximum charging current
#
using the charging capacity shown in the
driver's display.
harging cur-
ging cur-
The charging cable supplied is set to a country-
speci c maximum charging current value. When
charging abroad, the maximum value may exceed
the permitted value for that country.
Before charging at a mains socket, have the
#
maximum permissible charging current for the
relevant mains socket or the building inspec-
ted by a quali ed electrician.
When abroad, observe the country-speci c
#
laws when charging.
If you have questions concerning the charging
current or if there is a malfunction, please contact
a quali ed specialist workshop.
Ov Over ervie
view of t
w of the c
The charging cable control panel shows the cur-
rent status of the charging process.
he char
harging cable contr
ging cable control panel
ol panel
Advertisement
