Download Print this page

Mercedes-Benz EQS 2022 Operator's Manual page 66

Hide thumbs Also See for EQS 2022:

Advertisement

64 64
Occupant safety
Objects or loads in the trunk or cargo
R
compartment will not be restrained by the
seat backrest.
Make sure that the rear bench seat, the
#
rear seat and the seat backrest are
engaged before every trip.
If the rear seat backrest is not engaged and
locked in place, the red lock veri cation indicator
will be visible.
& W W ARNING
ARNING Risk of injury or death if the
permissible gross mass of the child and
child restraint system together is excee-
ded.
Too much load may be placed on the LATCH-
type (ISOFIX) child restraint system and the
child may not be restrained correctly in the
event of an accident, for example.
If the child and the child restraint system
#
together weigh more than the permissi-
ble gross mass of 73 lb (33 kg ), only use
a LATCH-type (ISOFIX) child restraint
system with which the child is secured
with the vehicle seat belt.
Also secure the child restraint system
#
with the Top Tether belt, if available.
Always comply with the information about the
mass of the child restraint system:
In the manufacturer's installation and operat-
R
ing instructions for the child restraint system
used
www.carobook.com
On a label on the child restraint system, if
R
present
Regularly check that the permissible gross mass
of the child and child restraint system is still com-
plied with.
When installing a child restraint system, observe
the following:
O Always observe the correct use of the seats
and consider their suitability for attaching a
child restraint system.
O Always comply with the manufacturer's
installation and operating instructions for the
child restraint system used.
O Make sure that the child's feet do not touch
the front seat. If necessary, move the front
seat slightly forwards.
® When installing a LATCH-type (ISOFIX) child
restraint system, also observe the following:
O When using a bab
When using a baby car seat in w
y car seat in weight gr
0/0+ and a rearw
0/0+ and a r
earwar ard-f d-facing c
acing child r
system in w
syst
em in weight gr
eight group I on a r
oup I on a rear seat
adjust the front seat so that the seat does
not touch the child restraint system.
O When using a f
When using a forw
orwar ard-f d-facing c
acing child r
system in w
syst
em in weight gr
eight group I:
oup I: remove the head
restraint from the respective seat, if possible.
In addition, the backrest of the child restraint
system must lie as at as possible against
the backrest of the vehicle seat.
A er the child restraint system has been
removed, replace the head restraint immedi-
ately and adjust all head restraints correctly.
O If the head restraint of the child seat cannot
be fully extended when it is installed in the
vehicle, this will result in restrictions on the
maximum size setting for child restraint sys-
tems in weight group II or III.
eight group
oup
hild res estr traint
aint
ear seat: :
hild res estr traint
aint

Advertisement

loading