Advertisement
48 48
Occupant safety
Always ensure that an unused seat belt
#
is fully retracted.
Inf Infor ormation on t
mation on the beltbag in t
he beltbag in the r
he rear seat belt
The BELTBAG identi cation indicates that a rear
seat belt is equipped with a beltbag.
When activated, the beltbag increases the protec-
ted area of the vehicle occupant's ribcage.
& W W ARNING
ARNING Risk of injury or death due to
use of a non-approved child restraint sys-
tem
In an accident, the beltbag may damage a
non-approved child restraint system or a child
restraint system which has not been approved
for use in conjunction with the beltbag.
Therefore, always use LATCH or ISOFIX
#
to fasten a child seat equipped with an
integrated restraint system.
For vehicles equipped with the optional
#
rear seat-belt airbags ("beltbag"), only
use a Mercedes-Benz approved booster
seat with integrated backrest.
Never use an airbag equipped seat belt
#
to fasten a front- or rear-facing child seat
ear seat belt
or a non-approved booster seat.
Please contact an authorized Mercedes-
#
Benz Center for information on approved
child restraint systems.
F F ast
astening and adjus
ening and adjusting seat belts
www.carobook.com
If the seat belt is pulled quickly or sharply, the
seat belt retractor locks. The seat belt strap can-
not be pulled out any further.
V V ehicles wit
ehicles with illuminat
h illuminated design seat belt buc
the illuminated seat belt buckle makes fastening
your seat belt easier in certain situations, for
example, when ambient light conditions are poor.
%
The illumination on the seat belt buckle does
not indicate that the seat belt buckle is func-
tioning correctly.
ting seat belts
ed design seat belt buckles:
kles:
Always engage seat belt tongue
#
belt into seat belt buckle
1
sponding seat.
T T o adjus
o adjust t t the seat belt height
he seat belt height: : press and hold
#
the belt guide release and slide seat belt out-
let
3
into the desired position.
T T o eng
o engag age t e the seat belt outlet
he seat belt outlet: : let go of the
#
belt guide release and ensure that seat belt
outlet
3
locks into position.
2
of the seat
of the corre-
Advertisement
