Advertisement
388 Wheels and tires
388
The wheels or tires have been changed or
R
newly installed.
Driver's display:
©
Service
4
5
Select
Tire Pressure
and con rm with a.
#
Swipe downwards on Touch Control on the
#
steering wheel.
The
Use current pressures as new reference
values?
message is shown in the driver's dis-
play.
Select
Yes
and con rm the restart with a.
#
The
Tire Pressure Monitor Restarted
is shown in the driver's display.
Current warning messages are deleted and
the yellow h warning lamp goes out.
A er you have been driving for a few minutes,
the system checks whether the current tire
pressures are within the speci ed range. The
current tire pressures are then accepted as
reference values and monitored.
If the tire pressure levels are not within the
speci ed range, the
Please Correct Tire Pres-
sure
message appears.
Bear in mind the following related topic:
Notes on tire pressure (
R
Loading the v
Loading t
he vehicle
ehicle
N N o o t t es on T
es on Tir ire and Loading Inf
e and Loading Infor ormation placard
& W W ARNING
ARNING Risk of accident from overloa-
ded tires
Overloaded tires may overheat and burst as a
consequence. Overloaded tires can also
www.carobook.com
impair the steering and handling characteris-
message
tics and lead to brake failure.
Observe the load rating of the tires.
#
The load rating must be at least half the
#
permissible axle load of the vehicle.
Never overload the tires by exceeding
#
the maximum load.
The Tire and Loading Information placard is on the
B-pillar on the driver's side of the vehicle.
page 383)
/
mation placard
1
Tire and Loading Information placard
Advertisement
