Advertisement
212 Driving and parking
212
Always make sure that nobody is within
#
the range of the garage door's move-
ment.
Only operate the following doors using the garage
door opener:
Doors with a safety stop and reversing feature
R
Doors which conform to the current U.S.
R
safety standards
Before programming the garage door opener, park
the vehicle outside the garage. Make sure that the
vehicle is switched on but not started.
R R eq equir uirements:
ements:
The vehicle has been parked outside the
R
garage or outside the range of movement of
the door.
The vehicle is switched on.
R
The vehicle has not been started.
R
%
The garage door opener function is always
available when the vehicle is switched on.
www.carobook.com
Check if the transmitter frequency of the
#
remote control has the frequency range of
280 to 868 MHz.
Radio equipment approval number:
NZLMUAHL5 (USA)
R
4112A-MUAHL5 (Canada)
R
Press and hold button 1,
2
#
wish to program.
Indicator lamp
4
ashes yellow.
%
It can take up to 20 seconds before the indi-
cator lamp ashes yellow.
Release the previously pressed button.
#
Indicator lamp
4
continues to ash yellow.
Point remote control
5
from a distance of
#
0.4 in (1 cm) to 3 in (8 cm) towards button
1,
2
or 3.
Press and hold button
6
of remote control
#
5
until one of the following signals appears:
Indicator lamp
4
lights up green continu-
R
ously. Programming is complete.
Indicator lamp
4
ashes green. Program-
R
ming was successful. Additionally, syn-
chronization of the rolling code with the
door system must be carried out.
If indicator lamp
4
does not light up or ash
#
green: repeat the procedure.
Release all of the buttons.
#
or
3
that you
Advertisement
