Vega POINTRAC 31 Operating Instructions Manual page 37

Standard/Full version
POINTRAC 31 • 8/16 mA/HART - four-wire
Further setup steps are described in the operating instructions manual
"DTM Collection/PACTware" attached to each DTM Collection and
which can also be downloaded from the Internet. Detailed descriptions
are available in the online help of PACTware and the DTMs.
Fig. 16: Example of a DTM view
All device DTMs are available as a free-of-charge standard version
and as a full version that must be purchased. In the standard version,
all functions for complete setup are already included. An assistant for
simple project configuration simplifies the adjustment considerably.
Saving/printing the project as well as import/export functions are also
part of the standard version.
In the full version there is also an extended print function for complete
project documentation as well as a save function for measured value
and echo curves. In addition, there is a tank calculation program as
well as a multiviewer for display and analysis of the saved measured
value and echo curves.
The standard version is available as a free-of-charge download under
http://www.vega.com. The full version is available on CD from the
agency serving you.
7 Setup with PACTware
37