Vega POINTRAC 31 Operating Instructions Manual page 32

6 Set up with the indicating and adjustment module
Further settings/HART
mode
Further settings/Copy
instrument settings
32
Menu Menu item
Setup Measurement
loop name
Isotope
Application
Background ra-
diation
Temperature unit
Damping
Current output
mode
X-ray alarm
Reference value -
Relay
Lock operation
Display Language
Displayed value
Further settings Temperature unit
HART mode
With this function you can select the mode.
The sensor offers the HART modes standard and multidrop.
The mode 'Standard', with fixed address 0 (factory setting), means
output of the measured value as 8/16 mA signal.
This parameter is described in the operating instructions manual
"Indicating and adjustment module".
With this function
Load parameter adjustment data from the sensor into the
l
indicating and adjustment module
Write parameter adjustment data from the indicating and adjust-
l
ment module into the sensor
This parameter is described in the operating instructions manual
"Indicating and adjustment module".
Default value
Sensor
Cs-137
Limit level
0 ct/s
°C
Is calculated automatically by the
instrument
8/16 mA, < 3.6 mA
Modulated measuring current
None
Released
Selected language
Pulse rate
°C
Standard
POINTRAC 31 • 8/16 mA/HART - four-wire