5.3
Control Tab
5.3.1 General Setting
•
Downlink HPA ON: Enables or disables the DL HPA (High Power Amplifier)
Uplink HPA ON: Enables or disabled the UL HPA (High Power Amplifier)
•
To enable any of the settings, click on the checkbox and click the Apply button.
5.3.2 System
Reboot: Clicking the reboot button will have the following popup show up:
•
Advanced RF Technologies, Inc.
Figure 5-9
Control page
Figure 5-10 General Setting
Figure 5-11 System
27