Status Tab; Band; Power & Gain; Figure 5-2 Status Tab - ADRF SDRX-43-BTF User Manual

5.2

Status Tab

5.2.1 Band

5.2.2 Power & Gain
This section displays the Input, Gain, and Output for both downlink and uplink.
Input [dBm] – Displays the in-band Downlink/Uplink signal level. The system will display "--.-"when the
•
input level is < -90 dBm.
Gain [dB]
•
- User Set: Displays the amount of gain that user set.
- ALC: Displays the amount of gain that is attenuated by ALC function.
- Actual: Displays the actual amount of gain that is currently in use.
• Output [dB] – Displays the Downlink/Uplink output power levels.
Advanced RF Technologies, Inc.
Figure 5-2 Status Tab
Figure 5-3 Band Display
Figure 5-4 Power & Gain Display
24