Table of Contents
Advertisement
Editing
Editing with another video recorder or a
camcorder
You can use your recorder as the source player or the recording
deck. You can use a camcorder as the source player and your
recorder as the recording deck. Refer also to the other
components' instruction manuals for connection and its
operations.
A
Make connections
Connection with another video recorder
L-2 IN/DECODER or
L-1 IN/OUT
When using your
recorder as the
recording deck,
connect its L-2 IN/
DECODER or L-1 IN/
OUT connector to the
source player.
Another recorder
Connection with a camcorder
Connect the camcorder's AUDIO/VIDEO OUT connectors to the
recorder's L-1 IN/OUT or L-2 IN/DECODER connector via a cable
adapter.
B
Load cassettes
Insert the playback cassette into the source player and the cassette
to be recorded on into the recording deck.
C
Select input mode on recording deck
Select the correct external input on the recording deck. On this
recorder, press AUX or PR R/T on the remote control or PR+/– on
the recorder.
Select "L-1" for the L-1 IN/OUT connector, or "L-2" for the L-2 IN/
DECODER connector.
D
Select edit mode
Select the appropriate edit mode for the components if such a
mode is equipped.
● On this recorder, set "PICTURE CONTROL" to "EDIT". (
E
Start playback
Engage the Play mode of the source player.
F
Start recording
Engage the Record mode of the recording deck.
Your recorder
To L1 IN/OUT
When using your
recorder as the source
21-pin
player, connect its L-1
SCART cable
IN/OUT connector to
(not
the recording deck.
provided)
System Connections
NOTE:
When you select a country in Central or Eastern Europe for
country setting, you cannot use decoder with this recorder.
Connecting to a satellite receiver
Connect the decoder to the satellite receiver's connector if you
have a decoder, L-1 IN/OUT connector to TV's connector, and
L-2 IN/DECODER connector to the satellite receiver's connector.
Then connect the satellite receiver and TV.
● Set "L-2 SELECT" to "A/V". (
● To record a programme via the satellite receiver, set the input
mode to "L-2" by pressing AUX or PR R/T on the remote
control or PR+/– on the recorder.
● To receive a scrambled broadcast, descramble the signal with
the satellite receiver.
● For details, refer to the instruction manual for the satellite
receiver and decoder.
Connecting/Using a decoder
You can enjoy the variety of programming that is available through
scrambled channels.
A Set "L-2 SELECT" to "DECODER". (
B Connect the recorder's L-2 IN/DECODER connector to the
decoder's 21-pin SCART connector using a 21-pin SCART cable.
C Perform the procedure as described in "When receiving a
scrambled broadcast" (
Connecting/Using a stereo system
You can listen to the soundtrack through your stereo system.
Connect the AUDIO OUT L and R connectors on the recorder to
the AUX IN or TAPE MONITOR connectors on your stereo
system's receiver or amplifier.
● When listening to sound through the connected stereo system,
turn the TV's volume down completely.
Subsidiary Settings
Mode Set
You can change various mode settings.
Turn on the recorder and the TV, and set your TV to its AV mode
or video channel.
A
Access Main Menu screen, then Mode Set screen
Press MENU. Press RT to place the
pointer next to "MODE SET", then press
OK or
.
12)
B
Select mode
Press RT to place the pointer next to the
item you want to set.
C
Change setting
Press OK or
table. Press MENU to return to normal screen.
— 11 —
12)
12)
14).
. The default setting is bold in the following
Advertisement
Table of Contents
