Connections; Analog Connections - JVC XL-R5010BKC Instructions Manual

Connections

Do not turn on the power until all connections have been completed.

Analog Connections

Use the accessory pin cables to connect this unit's LINE terminals with those for the TAPE/CD/VCR on the receiver, etc.
Recording signals
(line input)
Accessory pin cables
Playback signals
LINE
( )
IN REC ( ) OUT PLAY
LEFT LEFT
RIGHT RIGHT
Note
• The COMPU LINK-4 feature is only supported by other JVC
products also equipped with the COMPU LINK feature. Please
check the manual(s) of your JVC product for compatibility.
• Before selecting the COMPU LINK-4 MODE switch position
(CDR or TD), turn off the power and disconnect the power cord
from the wall socket. The function cannot be reset while the
power is on. Alternatively, if the COMPU LINK-4 MODE
switch position (CDR or TD) is changed while the power is on,
turn off the power, disconnect the power cord and then recon-
nect it. The new setting will be read into the system when power
to the main unit is turned back on.
• Misconnections can be avoided by using the white plugs on the
accessory pin cables for the LEFT channel and the red plugs for
the RIGHT channel.
• Insert the plugs all the way in. Incomplete connections may
cause noise.
• When plugging the power cord into the AC outlet, be sure to
match the width of the plug blades with the outlet.
TAPE
/CDR
Amplifier, receiver etc.
made by JVC
OUT
IN
(REC) (PLAY)
Accessory
connecting cable
(with black plugs)
Power
cord
COMPU LINK - 4
DIGITAL IN
(SYNCHRO)
COAXIAL
MODE
CDR TD
Selecting a COMPU LINK-4 MODE switch
Mode switch
position
• When connected with
CDR input/output
terminals of the amplifier
or receiver
CDR
• For more details regarding COMPU LINK, see page 43.
Optional connecting cable
Main Unit
to AC wall socket
DIGITAL OUT
OPTICAL COAXIAL OPTICAL
• When connected with
TAPE input/output
terminals of the amplifier
or receiver
MODE
TD
COMPU LINK - 3
SYNCHRO
CD player, cassette deck or
other component made by JVC
COMPU LINK - 4
SYNCHRO
MODE
CDR TD
3