Download  Print this page

JVC XL-R5020BK Instructions Manual

Jvc cd/cdr multiple compact disc recorder instructions.
Hide thumbs

Advertisement

CD/CDR MULTIPLE COMPACT DISC RECORDER
XL-R5020BK
STANDBY/ON
CD1
CD2
CD3
1
2
3
4
5
6
7
8
9
10
10
GROUP
PLAY
CONTROL
MODE
REPEAT
CD
CDR
GROUP
SET
GROUP
CD REC CD EDIT SYNCHRO
FADE
REC
FINALIZE
PITCH 0
REC MUTING
PITCH
RM-SXL001J
REMOTE CONTROL
MIN
MAX
MP3 PLAYBACK
INSTRUCTIONS
XL–R5020 CD/CDR MULTIPLE COMPACT DISC RECORDER
COMPACT
DIGITAL AUDIO
COMPACT
DIGITAL AUDIO
Recordable
ReWritable
For Customer Use:
Enter below the Model No. and Serial
No. which are located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LET0206-001A
[J]

Advertisement

Table of Contents

   Also See for JVC XL-R5020BK

   Related Manuals for JVC XL-R5020BK

   Summary of Contents for JVC XL-R5020BK

  • Page 1 CD/CDR MULTIPLE COMPACT DISC RECORDER XL-R5020BK STANDBY/ON GROUP PLAY CONTROL MODE REPEAT GROUP GROUP CD REC CD EDIT SYNCHRO FADE FINALIZE PITCH 0 REC MUTING PITCH RM-SXL001J REMOTE CONTROL INSTRUCTIONS XL–R5020 CD/CDR MULTIPLE COMPACT DISC RECORDER COMPACT COMPACT DIGITAL AUDIO...
  • Page 2 Warnings, Cautions and Others CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage"...
  • Page 3: Table Of Contents

    Table of Contents Introduction ... 2 About This Manual ... 2 Precautions ... 2 Precautions on Disc Playback and Recording ... 3 Parts Identification ... 4 Main Unit ... 4 Display Window ... 4 Remote Control ... 5 Menu Configuration ... 5 Getting Started ...
  • Page 4: Introduction

    Introduction We would like to thank you for purchasing one of our JVC products. Before operating this unit, read this manual carefully and thoroughly to obtain the best possible performance from your unit, and retain this manual for future reference.
  • Page 5: Precautions On Disc Playback And Recording

    Precautions on Disc Playback and Recording Playback This unit has been designed to play back discs bearing the following logos: CD ReWritable (CD-RW) CD Recordable (CD-R) Audio CD In addition to the above discs, this unit can play back audio data recorded on CD-G (CD Graphics), CD-Text, CD-Extra and CD-R/CD-RW (single session) including MP3 tracks (files).
  • Page 6: Parts Identification

    Parts Identification See pages in the parentheses for details. Main Unit 1 STANDBY/ON button and STANDBY lamp (9, 38) 2 Remote sensor 3 CD EDIT button (29, 30) 4 3-CD Changer disc trays (CD1, CD2, CD3) (10, 19) 5 3-CD Changer disc eject 0 buttons (0 CD1, 0 CD2, 0 CD3) (10, 15) 6 3-CD Changer disc number buttons (CD1, CD2, CD3) (9, 10, 19)
  • Page 7: Remote Control

    Remote Control STANDBY/ON GROUP PLAY CONTROL MODE REPEAT GROUP GROUP CD REC CD EDIT SYNCHRO FINALIZE PITCH 0 REC MUTING RM-SXL001J REMOTE CONTROL Menu Configuration You can show a menu on the display by pressing MENU while neither 3-CD Changer nor CD Recorder are playing (in stop mode).
  • Page 8: Getting Started

    Getting Started Supplied Accessories After unpacking, check to be sure that you have all the following items. The number in the parentheses indicates the quantity of the pieces supplied. • Remote control—RM-SXL001J (1) • Batteries—R6P(SUM-3)/AA(15F) (2) • Audio cord with RCA pin plugs (2) •...
  • Page 9: Connecting Other Components

    COMPU LINK remote control system You can use COMPU LINK remote control system (see page 40) by connecting this unit and a JVC audio component through the COMPU LINK-4 (SYNCHRO) jacks using cables with monaural mini-pugs in addition to the audio cord connection.
  • Page 10 To connect digital components This unit is equipped with two types of digital input/output terminals—coaxial and optical. When connecting a digital component equipped with a digital output terminal The following connection allows you to perform digital-to- digital recording on this unit (through the digital terminals). Audio component with digital output To optical...
  • Page 11: Basic Operations

    Basic Operations IMPORTANT When using operating buttons (3, 7, 8) on the remote control, check which indicator lights up on the display—CD PLAYER (3-CD Changer) or CD RECORDER. If the incorrect indicator is lit, press CONTROL CD or CONTROL CDR to select the correct target source. On the unit: Disc eject 0 buttons (0 CD1, 0 CD2 or 0 CD3)
  • Page 12: Playing Back Discs On 3-cd Changer

    Playing Back Discs on 3-CD Changer • For the playable discs on 3-CD Changer, refer to page 3. • This 3-CD Changer can play back MP3 discs. You can place either an audio disc or an MP3 disc on any disc tray. See page 18 for details.
  • Page 13: Basic Disc Operations

    Remote control: Disc number buttons (CD1, CD2, CD3) CONTROL PLAY MODE REPEAT GROUP GROUP Load discs onto the 3-CD Changer disc trays (see page 10). Press one of the disc number buttons (CD1, CD2 or CD3). The CD PLAYER indicator lights up on the display and 3-CD Changer reads out the disc contents.
  • Page 14: Programing The Playing Order Of The Tracks-program Play

    Programing the Playing Order of the Tracks—Program Play You can arrange the playing order in which the tracks play before you start playing. You can program up to 32 tracks. The programed tracks can be also recorded (see page 30). •...
  • Page 15 Start playing. On the unit: Press PLAY 3 for 3-CD Changer. From the remote control: Press 3. The tracks are played in the order you have programed. Program Play stops when all the programed tracks are played once (unless Repeat Play is activated—see page 15).
  • Page 16: Playing At Random-random Play

    Playing at Random—Random Play The tracks of all loaded discs in 3-CD Changer will play at random. • Random Play is possible only on 3-CD Changer. IMPORTANT When using operating buttons (3, 7, 8) on the remote control for the following operations, check the CD PLAYER (3-CD Changer) indicator lights up on the display.
  • Page 17: Repeating Tracks-repeat Play

    Repeating Tracks—Repeat Play You can repeat playing all the discs, the program or the individual track currently playing as many times as you like. GROUP CONTROL PLAY MODE REPEAT REPEAT GROUP GROUP From the remote control ONLY: Press REPEAT during or before playing. The REPEAT indicator lights up on the display.
  • Page 18: Playing Back A Disc On Cd Recorder

    Playing Back a Disc on CD Recorder • You can play back both finalized and unfinalized discs on CD Recorder. • Program Play, Random Play and Pitch Control cannot be used on CD Recorder. IMPORTANT When using operating buttons (3, 7, 8) on the remote control for the following operations, check the CD RECORDER indicator lights up on the display.
  • Page 19: Basic Disc Operations

    Remote control: CONTROL PLAY MODE REPEAT GROUP GROUP Load a disc onto the CD Recorder disc tray (see page 16). Press CONTROL CDR, then 3. The CD RECORDER indicator lights up on the display. CD Recorder reads out the disc contents and the playback starts with the first track.
  • Page 20: Playing Back Mp3 Discs On 3-cd Changer

    Playing Back MP3 Discs on 3-CD Changer • You can play back MP3 tracks (files) recorded on MP3 discs (CD-R/CD-RW) on the built-in 3-CD Changer. • You cannot record MP3 tracks using the built-in CD Recorder. • Program Play, Random Play and Pitch Control are not available for MP3 discs. About MP3 MP3 is an abbreviation of Motion Picture Experts Group (or MPEG) Audio Layer 3.
  • Page 21: Playing Back Mp3 Discs

    Playing Back MP3 Discs You can play back MP3 discs on 3-CD Changer. • You can place either an audio CD or an MP3 disc on any disc tray. IMPORTANT When using operating buttons (3, 7, 8) on the remote control for the following operations, check the CD PLAYER (3-CD Changer) indicator lights up on the display.
  • Page 22: Basic Mp3 Disc Operations

    Basic MP3 Disc Operations To go to another track On the unit: Turn MULTI JOG ¢ / 4. From the remote control: Press ¢ or 4. • ¢: Skips to the beginning of the next or succeeding tracks (beyond the group boundaries).
  • Page 23: Recording On A Cd-r/cd-rw

    Recording on a CD-R/CD-RW Before You Start Recording Before you start, remember... • Perform recording onto a CD-R AUDIO or CD-RW AUDIO disc (see page 3). • When you record onto a partially recorded unfinalized CD-R or CD-RW, its contents are not erased or overwritten. The recording starts from the point following the last recorded track of the disc.
  • Page 24: Recording Manually-standard Recording

    Recording Manually—Standard Recording You can use this method to record any sources and to record any combination of two sources. IMPORTANT When using operating buttons (3, 7, 8) on the remote control, check which indicator lights up on the display—CD PLAYER (3-CD Changer) or CD RECORDER.
  • Page 25 To stop recording for a moment, press PAUSE 8 for CD Recorder on the unit or 8 on the remote control. To resume recording, press PLAY 3 for CD Recorder on the unit or 3 on the remote control. (A track mark is recorded when you resume recording.) To stop recording, press STOP 7 for CD Recorder on the unit or 7 on the remote control.
  • Page 26 To fade in and out recording—only for analog source You can fade in and fade out the for about 5 seconds when recording analog source is either “LINE IN,” “MIC IN,” “CD+LINE MIX,” “CD+MIC MIX” or “LINE+MIC MIX.” CONTROL PLAY MODE REPEAT GROUP...
  • Page 27: Preparing For Cd Synchronized Recording

    Preparing for CD Synchronized Recording The following four methods are available when recording from discs in 3-CD Changer onto a CD-R or CD-RW in CD Recorder. Disc Direct Recording—Records a disc in 3-CD Changer (see page 26). One Track Recording—Records a track of a disc in 3-CD Changer (see page 28). Listening Edit Recording—Records only tracks you select while playing back discs in 3-CD Changer (see page 29).
  • Page 28: Recording From 3-cd Changer-cd Synchronized Recording

    Recording from 3-CD Changer—CD Synchronized Recording Using the synchronized recording methods, you can start playback and record at the same time. • CD Recorder automatically selects appropriate recording—either digital or analog—during CD Synchronized Recording. When digital source is selected as the playback sound, it will be recorded digitally only if it is a first-generation digital copy (see page 42).
  • Page 29 Recording the entire disc without any interruption When recording from a disc to another disc, the contents of the original disc are duplicated usually track by track. This means if some sounds are recorded between the tracks, they will not be recorded on a newly duplicated disc. For example, when you play a live disc, you may hear audience clapping their hands;...
  • Page 30: One Track Recording

    7 7 7 7 7 One Track Recording Synchronized One Track Recording allows you to record a track of a disc in 3-CD Changer onto a CD-R or CD-RW in CD Recorder. This recording method is convenient to make a disc of your best albums. IMPORTANT When using operating buttons (3, 7, 8) on the remote control, check which indicator lights up on the display—CD PLAYER (3-CD Changer) or CD RECORDER.
  • Page 31: Listening Edit Recording

    7 7 7 7 7 Listening Edit Recording Listening Edit Recording allows you to make a program while listening to and checking each track of the loaded discs (up to 3 discs) in 3-CD Changer, then to start recording the program. •...
  • Page 32: Program Edit Recording

    7 7 7 7 7 Program Edit Recording You can arrange the recording order of tracks of the discs in 3-CD Changer before you start playing. • You can program up to 32 tracks. IMPORTANT When using operating buttons (3, 7, 8) on the remote control, check which indicator lights up on the display—CD PLAYER (3-CD Changer) or CD RECORDER.
  • Page 33: Recording From The External Sources-sound Synchronized Recording

    Recording from the External Sources—Sound Synchronized Recording With this recording method, playback and recording start automatically when the playback sound comes into this unit through the DIGITAL IN terminals, LINE IN jacks or MIC jack. • Recording can be also stopped automatically when the playback sound stops coming in (see page 33). •...
  • Page 34: Recording From The Two Sources Mixed-sound Mixing Recording

    Recording from the Two Sources Mixed—Sound Mixing Recording You can record sounds mixing 2 sources. When using this method, analog recording is always performed. • Recording can be also stopped automatically when the playback sound stops coming in (see page 33). •...
  • Page 35: Other Recording Functions

    Other Recording Functions On the unit: XL – R5020 CD/CDR MULTIPLE COMPACT DISC RECORDER COMPACT DIGITAL AUDIO FINALIZE MENU 7 7 7 7 7 Setting auto-stop for analog Synchronized Recording When using Synchronized Recording for recording from analog sources, you can stop recording automatically as well as starting.
  • Page 36: Unfinalizing A Disc-only For Cd-rw

    On the unit: CD Recorder disc tray XL – R5020 CD/CDR MULTIPLE COMPACT DISC RECORDER COMPACT COMPACT DIGITAL AUDIO DIGITAL AUDIO Recordable ReWritable MENU 7 7 7 7 7 Unfinalizing a disc—only for CD-RW By erasing the TOC (Table of Contents) of a finalized CD-RW, you will be able to record on the CD-RW again.
  • Page 37: Separating Recording Tracks Automatically

    To activate auto track-marking again, select “AUTO TR ON” in step 3. • Track marks must be recorded apart from each other by 4 seconds. If you press SET twice within 4 seconds, the second press will be ignored (only one track mark will be recorded where you press SET for the first time).
  • Page 38: Erasing Tracks (only For Cd-rw) -track Erase

    On the unit: CD Recorder disc tray XL – R5020 CD/CDR MULTIPLE COMPACT DISC RECORDER COMPACT DIGITAL AUDIO 7 7 7 7 7 Erasing tracks (only for CD-RW)—Track Erase Before finalizing a disc, you can erase recorded tracks—from a selected track up to the last track—on a CD-RW at a time. •...
  • Page 39: Using The Timer

    Using the Timer • Before using the timers—Daily Timer and Once Timer, you need to set the clock built in the unit. On the unit: STANDBY/ON XL – R5020 CD/CDR MULTIPLE COMPACT DISC RECORDER COMPACT DIGITAL AUDIO Setting the Clock You can set the clock whether the unit is turned on or off (on standby).
  • Page 40: Using Daily Timer And Once Timer

    Using Daily Timer and Once Timer You can wake up to your favorite music (Playing Timer) or start recording sounds at the time you set (Recording Timer). On the unit: STANDBY/ON XL – R5020 CD/CDR MULTIPLE COMPACT DISC RECORDER COMPACT DIGITAL AUDIO •...
  • Page 41 Setting Playing Timer Turn MULTI JOG ¢ / 4 on the unit or press 3 or 2 on the remote control to select the source—“CD” or “CDR,” then press SET. DAILY 3 indicator or ONCE 3 indicator stops flashing and remains lit. The setting you have done are shown on the display in sequence.
  • Page 42: Compu Link Remote Control System

    JVC’s audio components like this unit through the remote sensor on a receiver (amplifier). Connection To use this remote control system, you need to connect JVC’s audio components through the COMPU LINK-4 (SYNCHRO) or COMPU LINK-3 (SYNCHRO) jacks (see below) in addition to the connections using audio cables with RCA pin plugs (see page 7).
  • Page 43: Maintenance

    Maintenance To get the best performance of the unit, keep your discs and mechanism clean. General Notes In general, you will have the best performance by keeping your discs and the mechanism clean. • Store discs in their cases, and keep them in cabinets or on shelves.
  • Page 44: Glossary

    Glossary OPC (Optimum Power Control) OPC is a function that checks the loaded disc and automatically adjusts the laser for optimum recording setting before recording. PCA (Power Calibration Area) A space reserved at the beginning of a CD-R/CD-RW for calibrating the laser output power required to record on that disc. PMA (Program Memory Area) A temporary memory area on a CD-R/CD-RW, where the information about the recordings on the disc—track numbers, tracks’...
  • Page 45: Message

    Message Message ALL SKIP TR Skip marks are recorded to all the tracks. ALREADY FINAL You are trying to record on a finalized disc. ALREADY UNFIN. You are trying to unfinalize an unfinalized disc. BLANK DISC No track is recorded on the loaded disc. CANNOT ERASE Loaded CD-RW disc is damaged.
  • Page 46: Troubleshooting

    Troubleshooting If you are having a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer, for service.
  • Page 47: Specifications

    Specifications Common specification Audio input sensitivity/Impedance (at 1 kHz) Analog input: LINE IN (REC): MiC IN: Digital input: DIGITAL IN: OPTICAL DIGITAL IN: COAXIAL (With the built-in sampling rate converter, corresponding to 32 kHz/44.1 kHz/48 kHz) Audio output level/Impedance (at 1 kHz) Analog output: LINE OUT (PLAY): HEADPHONE:...
  • Page 48 To prevent electrical shock,do not open the cabinet.There are no user serviceable parts inside.Please refer to qualified service personnel for repairs. Accessories To purchase accessories for your JVC product,please call toll free:1 (800)882-2345 or on the web at www.JVC.com BT-51005-5...
  • Page 49 If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with a copy of your bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center, the name and location of which will be given to you by the toll-free number.
  • Page 50 VICTOR COMPANY OF JAPAN, LIMITED 0502KTYMDWJEM...

Comments to this Manuals

Symbols: 0
Latest comments: